Sergio-tix
Sergio-tix
Does not work. Used 3 different servers. Connected to Synology, Raspberry, router. ``` rst:0x1 (POWERON_RESET),boot:0x3 (DOWNLOAD_BOOT(UART0/UART1/SDIO_REI_REO_V2)) waiting for download ets Jun 8 2016 00:22:57 rst:0x1 (POWERON_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT) flash read err,...
ESP32 more productive and has 3xUART hardware up to 5Mbps (from datasheet). It makes sense to port. In combination with Tibbo software, you can get a converter for several protocols...
The node-red LOG has exactly the same information and nothing more:   ``` [{"id":"31d93ddc.b29162","type":"snmp","z":"975b3811b4e20b9b","host":"192.168.15.5","version":"1","timeout":5,"community":"public","auth":"noAuthNoPriv","authprot":"MD5","privprot":"DES","oids":"1.3.6.1.4.1.6574.5.1.1.8.14\n","name":"","credentials":{},"x":1290,"y":240,"wires":[["279326ae.a27b6a"]]},{"id":"40af2498.6eaf7c","type":"inject","z":"975b3811b4e20b9b","name":"","props":[{"p":"payload"}],"repeat":"","crontab":"","once":false,"onceDelay":0.1,"topic":"","payload":"true","payloadType":"bool","x":1130,"y":240,"wires":[["31d93ddc.b29162"]]},{"id":"279326ae.a27b6a","type":"debug","z":"975b3811b4e20b9b","name":"","active":true,"tosidebar":true,"console":false,"tostatus":true,"complete":"payload","targetType":"msg","statusVal":"payload","statusType":"auto","x":1470,"y":240,"wires":[]}] ``` ssd SMART  [test01_nodered (1).csv](https://github.com/node-red/node-red-nodes/files/10391604/test01_nodered.1.csv) **UPD** And here is a log...
 Yes. Apparently this is a Synology bug. I am 100% sure of this, I have been using their products for a long time. This bug will not be fixed...
> у вас в D5 вместо питания резистор заведен, и поэтому usb не видит low speed Какое питание? Вот схема автора:  У [swaftrade](https://github.com/swaftrade) всё по схеме собрано....
> Я плюнул на это дело. Я полазил по инетам, эта тема тянется с 2013 года, и способ этот 50/50 в лучшем случае. Работает не стабильно и на грани. И...
> You can just copy the content of that file directly in your .ino file and use the above name "ucg_font_cu12" (-n option) as argument for the setFont command. What...
> **_I observed following 2 points_** > > 1. your reading required **2 REGISTERS** for evaluation of a one parameter(from SHORT column) > 2. your readings will be required to...