Sepidak comments

Results 5 comments of


                                            Sepidak

channel numbers are not corrected after removal of bad channels

Thank you for your quick reply Marius. Yes, that makes sense. Channel depths are shown correctly though, so should be possible to include the correct channel numbers in Phy too.

Yaw, pitch and roll not behaving as expected

@dbirman Hi Dan, it's great to read that this bug is reported and flagged to be fixed. I just wanted to add that the ability to tilt the probe in...

Yaw, pitch and roll not behaving as expected

Thank you for your reply Dan. The issue is the same as you mentioned and is also flagged above. We need to tilt the 4-shank probe in roll while the...

Yaw, pitch and roll not behaving as expected

The problem with the example you suggested is that pitch is at 75, meaning the 4 shanks are not all aligned in the same plane rostro-caudally, so the tip of...

Yaw, pitch and roll not behaving as expected

Thank you @dbirman. This seems to work, although we're still trying to get our head around it! :) Is it correct to say that for a 18 degree tilt angle...