SensorsIOT

Use WifiManager for configuration

2

I like your two projects a lot and was able to implement them! But I am quite familiar with ESP32 and PlatformIO. Not all HAMS are ESP32 cracks but still...

Service not discovered in BLE_Client example

37

I use the BLE_notify example without changes and try to connect to it using the BLE_Client example. The only changes I did there was to copy the two UUID strings...

Hi Charles, I wanted to give my gateway to a colleague and try to install the newest software. Unfortunately, the script does no more work and creates many errors (e.g....

Setup of hap AC3 with 3.23.4.0 problems

9

I flashed my new hap ac3 first with several nightly builds, and now with the official release. I always encounter the same problem: In setup, I get this error while...

I tried to set the IP addresses from the UI on my Kraken Pi. Unfortunately, it does not save it (returns to the default settings after the next refresh). A...

[New Variant] WL33CC2 support

3

**Board description (please complete the following information):** - Name: 511-NUCLEO-WL33CC2 or CDSENET E04-400M20S Module - Link to all relevant information: https://www.st.com/en/evaluation-tools/nucleo-wl33cc2.html https://www.cdebyte.com/products/E04-400M20S

When using `esp_wireguard` on ESP32-C3, the device crashes with "Load access fault" when `allowed_ip` is set to a non-zero IP address (e.g., `10.0.0.2`). ## Environment - ESP-IDF: 5.x (via PlatformIO)...