Sekilsgs2

cc3220: 2.19+ crash on void mgos_conf_free_str(const char **sp)

1

Board cc3220 On 2.19+ fw crashes when running function from **mongoose-os/src/mgos_sys_config.c** ``` mgos_sys_config_set_device_id(device_id); ```

TBS Mambo - bug with backlight.

2

**Describe the bug** When backlight have enabled **Both** mode, which mean that if we cant moving sticks or pots FW disable backlight by timer, but mambo stay with backlight ON...

Hi. I'm trying using this for Ebyte E78 (ASR6601CB) module but i'm see that ASR6601CB dont have some gpios for init SX1262 chip - ``` void SX126xLoracInit() { LORAC->CR0 =...

Gopro 10 DLRV - LABS_HERO10_01_50_70 need restart after two records

2

First - if i'm using DLRV=1 in gp10 - i'm need restart camera after two records - i'm see this bug in 11 - but i'm using 10! Second -...

When using backlight mode both - backlight working always? why many time (some time always) backlight stay in ON when Radio does not move or in hands - just lies...

there is no way to flash an external module elrs, frsky, etc. ??

Please add temperature code to driver. ``` bmi270_read_data(BMI270_REG_TEMPERATURE_LSB, buf,2); data->temp = (float)((int16_t)((buf[1]

When using high powers (700-1200mw) SNR in goggles decreasing - goggles jamming themselves. goggles start using MCS3 from MCS4. At low power modes - there is no such..

Walksnail avatar googles using only ONE antenna (first - right up) and not other 3

1

No matter what signal on other antennas - if the transmitter loses connection with the googles - the googles use the first antenna to communicate with the transmitter - then...

Hi. Current focus mode - this is very very bad compared to DJI - always have -50% of image because focus mode make unreadable picture - only big boxes. Need...