Saiqin
Saiqin
 Hi All. I try to the time synchronization for two hackrf one. The physical connections is shown as above.  Then command in terminal. (1st question here): why after...
thank you very much! there is no clock signal detected after i take target device. Hack Index 0--->Serial 59F (Tx); Hack Index 1--->Serial C63(Rx1); Hack Index 2--->Serial F07(Rx 2); ...
> Another problem is that you're starting both `hackrf_transfer` commands at the same time. > > If you're using one HackRF to trigger the other, you need to start the...
> Another problem is that you're starting both `hackrf_transfer` commands at the same time. > > If you're using one HackRF to trigger the other, you need to start the...
> How are you measuring that delay? Is there some unique feature in your transmitted signal that you're using to compare? The two hack receive the signal, why the second...
> If you're referring to the difference between the waveforms on the left and the ones on the right, this is because the one on the left has been waiting...
 Hi @martinling This is the two slave hackrf one to receive signal, do you know why the left is so different with right? right is perfect i think. Do...
> @Saiqin > > Those signals look well matched to me. There are two differences between them, both of which are to be expected: > > 1. Scaling. The range...
If I just connect the p15 and p16 to make the synchronization, no connection between CLK_IN and CLK_OUT, there is just a sampling difference. So this is feasible for synchronization...