Ropuh

Hello, please implemente it even partial. HA via zigbee2mqtt operates Closed/Opened (via contact sensor) and moving (without direction - close/start based on contact sensor).

If only I could code...

` {"attribute":"currentSummDelivered","cluster":"seMetering","maximum_report_interval":3600,"minimum_report_interval":5,"reportable_change":[1,1]}],"scenes":[]},"242":{"bindings":[],"clusters":{"input":[],"output":["greenPower"]},"configured_reportings":[],"scenes":[]}},"friendly_name":"Salon Choinka","ieee_address":"0xa4c1385d85a35265","interview_completed":true,"interviewing":false,"manufacturer":"_TZ3000_gjnozsaz","model_id":"TS011F","network_address":58994,"power_source":"Mains (single phase)","supported":true,"type":"Router"}, ` works zigbee2mqtt 1.34 and crash after upgrading to 1.35

> Just published [v1.9.3-rc.0](https://www.npmjs.com/package/homebridge-z2m/v/1.9.3-rc.0) to NPM. > > I believe this should solve the problem, but unfortunately I don't have time to update Zigbee2MQTT on my production environment now to...

USB C device is incorrectly detected as a one gang switch. The attached in zigbee2mqtt image is the switch image.