Romeo-Golf
Romeo-Golf
While Twitter Bot's may not be for everyone, this element stood out as being something which may have wider appear so figured it was worth starting a thread to discuss...
So while my use case is to use a map layer with as little geographical information as present for testing, debugging and sharing of screenshots, I figured this may be...
So although not exactly in the spirit of the project, this is something I would find useful to allow me to install and test the code without having to setup...
Would it be worth adding links to any of the flight tracking sites which make historical information available to allow folks to see the whole flight track etc?
Merge upstream 1.51 from http://www.airspayce.com/mikem/bcm2835/bcm2835-1.51.tar.gz
Having read a user who had to add "a cable to feed 5V to the centre pin of the external GPS antenna connector to use an active antenna" I just...
In order to use timing information from GPS to NTP it is required to take the PPS into a GPIO pin on the Pi, am I reading the schematics correctly...
Forgive me if there is one which I havent spotted but if not then it would seem useful to have a master config file which records all of the install...
As the install script is used to update both itself, and the various component software elements, it would seem useful to have an option to run in such a way...
Another one for the todo list is to add Radarbox24 as an additional feeder: https://www.radarbox24.com/blog/radarbox24-raspberry-pi-client https://www.radarbox24.com/raspberry-pi/guide http://apt.rb24.com/inst_rbfeeder.sh