Rick

> hey @RickAndTired, can you check if this is still an issue with Heroic 2.3.1? Yeah it's still happening in 2.3.1

Yes it does For hwmon2, I don't have an hwmon0 directory there

Are you using the Snap version? There is an issue posted on their github https://github.com/snapcrafters/cumulonimbus/issues/2 The Snap version crashes for me, but the Appimage works fine. You could give that...

It's an issue with the Snap version which is maintained by Canonical. https://github.com/snapcrafters/cumulonimbus/issues/2 Try installing through another method and it should work.

~/.config/pulse/default.pa [default.pa.txt](https://github.com/werman/noise-suppression-for-voice/files/4691306/default.pa.txt) (.txt added so I could upload through github) The only additional configuration is adding latency_msec=1 to module-loopback, but the problem happens without it as well. /etc/pulse/default.pa [default.pa.txt](https://github.com/werman/noise-suppression-for-voice/files/4691307/default.pa.txt)

Commenting `load-module module-switch-on-connect` makes things worse, I can't get Monitor of Null Output to work at all when I do that Looks like I can remove `pulseaudio --start` from my...

Thank you, I'll try there

@mikhailswift Where exactly would I put it? This is what I have now for that line: `load-module module-loopback source=alsa_input.usb-Samson_Technologies_Samson_GoMic-00.iec958-stereo sink=mic_raw_in channels=2 latency_msec=1` I tried this and it didn't work: `load-module...

If you'd like to give it a try I think 1.1.1215 is the newest build without Avalonia https://github.com/Ryujinx/release-channel-master/releases/tag/1.1.1215

Disabling logging helped (not fixed) my Avalonia settings lag a bit I don't have an Nvidia card or the micro stuttering, but might be worth a try Since it seems...