RepRapThailand

Hi, How to connect with controller board with only 3 signals 5V, Step and DIR? Best Regards,

How to interface GRBL on STM32 with MKS-TB67S109-OC

1

Hi, I try with GRBL on Arduino UNO and can spin motor but when I try with GRBL on STM32 the motor did not spin. https://github.com/makerbase-mks/MKS-Big-Current-Driver/tree/master/MKS%20TB67S109%20OC/MKS%20TB67S109-OC%20V1.0_001 Best Regards, 

How to connect with GRBL board?

1

Hi, How to connect rasPyCNCController with GRBL controller? Regards,

Motor Driver : How to interface with 3.3V logic level

1

Hello, I try these drivers with GRBL on Arduino UNO and all four drivers can spin motor but when I try with ESP32 only two drivers TB6560 and Black driver...

Please, help check and suggest modifications CNC3040 map file.

16

Hello, I use Blue Pill but try to re-map pins difference from CNC3040 and need UART1. This is a map file that I try to modifications and What other files...

Hello, I try these drivers with GRBL on Arduino UNO and all four drivers can spin motor but when I try with STM32F103 only two drivers TB6560 and Black driver...

Dear Sir, I could not find MK22DX256VLF5 from any distributor. What the part numbers can be replaced? Regards,