Regressor

Some problem with serial communication

2

Hi. I got a ultimaker2 to repair. It got a hole inside X-driver and then 24V inside 5V line and all 5v related chips was burned. So I replaced drivers,...

Camera card became small for seconds when switching to live view

14

**Release with the issue:** I'm using Frigate lovelace card v5.2.0 **Browser and Operating System:** I got this problem on Windows10/Chrome, Windows10/Firefox, Linux/Chrome **Description of problem:** I added a grid card...

MJSXJ14CM camera firmware dump

11

I got a Xiaomi C200 camera (MJSXJ14CM) opened it and downloaded a dump from 25vq128 spi nand. It looks like they hardened factory mode. Now it looks like this: ```...

Faced a problem with knockd not receiving packets because of ETHERTYPE_VLAN

1

Hi. I have a vps with ubuntu 22. I installed knockd using apt and can't get it working I started it with debug and copied filter string. Then I started...

RPI CM4 board. CB1 can't start

3

Hi. I have a working custom RPI CM4 board. CB1 module (v2.2) after power on eats 120ma from 5V bus and it looks like it can't start. RX/TX shows nothing,...

Autodiscovery doesn't work on newly added devices

7

Hi. I installed HASS.Agent on new device (win10 notebook with name 'notebook'). Only MQTT used. I checked mqtt topics via MQTT explorer and I can see hass.agent\devices\notebook topic (and other...

PTZ support. Can I make a majestic plugin to support PTZ over onvif / web ?

2

Hi. I tried to run OpenIPC on Xiaomi C200 (MJSXJ14CM, T31L, gc2083 sensor, ptz thru /dev/motor ioctl, gpio based ircut/irled) and it work (currently I run majestic using manu.sh script...

ESPHome remote not working in 2025.2.5

7

Hi. Tried to setup it under 2025.2.5 and failed. I added a esphome device with: ``` api: services: - service: send_raw_command variables: command: int[] then: - remote_transmitter.transmit_raw: code: !lambda 'return...

**Describe the bug** "pose" plugin not listed in common/typed_dict.py check_fields_by_name function **To Reproduce** Try to call detection.detect(image_path = INPUT_IMAGE_PATH, options={"face_plugins": "pose"}) **Expected behavior** pose plugin used during detection and pitch...