RaptorSDS
RaptorSDS
i have now such a board , the CPU has a sticker with new label also my board has i2c pins near MPU and two pins that looks like button...
ok unterstand see this point as a problem in Dietpi and other linux overlay system
ok i saw wrong node js repro , newest 8 my is 4 ,
thank you , i also intrested in disconnect from relay
danke für die Anleitung Register 2Bh sollte 43(dec) in der Modbus 1118 liste sein Somit Switch EIN/AUS = 0=aus 1=ein 2=Herunterfahren ( wohl neu dann Relais)  Thank you for...
i think that was print on code/help page that no changelog is release , yes 2.06 make sence because all firmware
Please add this Module to rtkbase , @deece or comit your tree to oginal master i got now rdkbase also work with LC29H but only RCTM3 , didnt see NMEA...
> Just wanted to add to this great write up by [@deece](https://github.com/deece), whether it's on Windows or Linux (raspberry pi). I've had to have the LC29H-BS connected via USB to...
I done the survey in by disconnect the base , connect my rover to the fixed base antenne used another base in my near to have trk fix for this...