Qianli Ma
Qianli Ma
> Hi - with my fresh UNRAID install i get the following Logs with the Unbound Docker: > > **[1668439651] libunbound[22:0] error: udp connect failed: Cannot assign requested address for...
> I'm a bit late to this party, have you considered re-flashing the main mcu with an edited version where the endpoints go to wherever you want? Except for `time.hello.is`...
> That could be an option, but I think they might have a UART on there that can be used to flash it? Anyway I should take a look at...
I only have some dev background, but I understand Chinese and am willing to help keep this project alive.
可以切换成 https://github.com/CyrielRct/midea_ac_lan 这个仓库的开发者联系不上了
I believe that the contact sensor is working as expected buy not the tamper sensor?
> 老方案不知道现在还生效不，HA安装易微联插件，在易微联的APP里绑定美的账号，以前记得可以获取美的旗下小天鹅洗衣机的状态信息，貌似不能控制。 易微联的API key过期了，v1 api可以没办法申请，v2的能申请但是之前的插件得重新写
> ### 设备类型及型号 (或SN) > 0000003182239692714110XXXXXXXXXX > > ### 新功能的描述 > [我有注意到老项目有人已经提过issue，我以为更新后会解决，但是并没有，希望开发大佬帮忙出个指导教程)](https://github.com/georgezhao2010/midea_ac_lan/issues/469) 可以通过ewelink来控制，colmo指挥屏显空气改了发现方式目前发现不了
> 请试一下最新的v0.6.2版本，如果仍然不行，然后根据首页readme说明，开启debug log，然后执行完整的添加设备的流程，上传完整的debug log，进一步确认问题原因吧 还是不行，直接发现不了设备。看了代码应该是换了发现设备的密钥
> > Still not working, the device cannot be discovered directly. After reading the code, it seems that the key for the discovery device has been changed. > > Can...