mj_oss

 For reference, the images should look like the one above after reconstruction. I am currently trying to achieve this using LEAP, but it appears that I am making...

In our half-beam geometry, the centerline of the source is positioned 38.139 mm from the center of the detector. p0.x, p0.y: coordinates of the center of the image on the...

I first downloaded the code from the champley_dev branch, deleted the existing version, and reinstalled it. I then made the changes as you suggested: 1. Change the direction of the...

I apologize, but I entered the start_index incorrectly. With start_index = 47, the measured projection matches the information in geometry.txt. Can these parameters be applied to LEAP's "modular-beam" geometry?

The versions were different. Everything is working fine now that I matched the version to 1.11. Thank you very much. By the way, could you please explain how you estimated...

thank you very much. It's working well now. However, I discovered one more unexpected result during my attempt. In binning mode, when using leapct.set_default_volume(), the reconstruction works well. It also...

Of course. I clicked "Star" because it is such a useful toolkit. You mentioned two methods regarding the offset Z as follows: 1. leapct.set_volume(750, 750, 450, 0.2, 0.2, 0.0, 0.0,...

@kylechampley Yes, I am using the latest code. Just in case, I downloaded the main code again and reinstalled it. I also tried cropping the data as you suggested, but...

Another issue is when using iterative reconstruction techniques in offset scans, the resulting image shows artifacts in the center as shown below. Is there a way to resolve this artifact?...

@kylechampley First issue I am using an RTX 4090 with a single GPU. In version 1.12, I tested the FBP reconstruction with "bin_mode = false", and the results are shown...