Wojciech Lazarski
Wojciech Lazarski
All 4 zones are being combined. When you look for example on Aorus Master it’s zones seems to be separated in editor.
Thanks. Still what make the MSI Aourus Master set to be split into 3 separate entires from single entry in OpenRGB?
I've just created a pull request with fixes for MacBookPro 2018
I tested it with MacBookPro15,1 ( i9 ). I couldn't manage to do anything with the fan speed with the mode set to auto. It was working ok with manual...
@hholtmann Auto mode forced the fans to slowly go to min speed without any load. Hope that this is default behaviour as I stated to play with different Smc control...
@touchbyte @hholtmann First of all I haven't see them off so far ( speed is always equal or higher than min in auto - in forced the lowest I've managed...
To need to remove the previous settings as these values are stored in Machines.plist
@samleemc Please copy and paste output from smcFanControl.app/Contents/Resources/smc -f and smcFanControl.app/Contents/Resources/smc -l | grep F0
This seems to be ok. Now force all the fans to max speed in the app and without exiting the app run above commands again.
I use NVM connected to Rpi5 via PiHat. I've installed Ubuntu and Pi OS. Pi boots to busybox but it is not finding the root partition. Ubuntu cannot even unpack...