PianSom

I installed yesterday, and am also seeing this behaviour for certain wifi clients. Reconnecting them using the Unifi controller appears to resolve the issue. I also get the same message...

"I can confirm that grafana 8.0.0, 8.0.1 and 8.0.2:latest all have issues downloading plugins in Synology. Currently running 7.5.8 without a hitch, and believe this should be the recommended release...

Odd. I just this week had 3 delivered from Aliexpress in China, and all flashed fine using Edge. [Here](https://www.aliexpress.com/item/1005001583361057.html?) is the item I purchased. Maybe I got an end of...

`mqtt: # Specify your MQTT Broker's hostname or IP address here host: 192.168.1.xxx port: 1884 #leave empty if none username: xxx password: xxx # Preface for the topics $PREFACE/$TOPIC preface:...

As I copied the config I noticed the lack of spaces before the button Mac address. I put a couple in and ran with sudo and all seems happy! I...

No joy, I'm afraid. I get to "Waiting for dash buttons to be pressed" but the Pi I am running it on does not seem to be receiving any button...

My button broadcasts on udp (as found by running node-dash-button's find_buttons, which reports Possible dash hardware address detected: 18:74:2e:1f:xx:xx Manufacturer: unknown Protocol: udp I have tried amending server.js, so that...

OK, I found the problem At it's core the issue is that my Dash button only uses udp. This, combined with the fact that the install managed to find an...

I use homebridge-mqtt with node-red and a Broadlink RM Pro (infrared + 433MHz transmitter) and associated python coding to give a MQTT interface. Together these can control various devices. Here...

Not least because the actual discharge rate reported is 5% MORE than the rated value! Hence the question. (Wasn't really querying the curves.)