PhillyGilly

1. I run my Solar to 65C at the bottom of the cylinder which heats the top up to above 60C. 2. Here are the reported values of on/off delta...

I'm not in a position to run tests atm, but what is the relationship between "boiler dhw comfort" and "boiler hysteresis dhw on"? I thought ECO mode just set the...

@MichaelDvP I'm running the EMS-ESP_solar-3_2_2b14-ESP32.bin now. I'm getting {"id":164,"collectortemp":26.5,"cylbottomtemp":51,"solarpump":"off","pumpworktime":387239,"cylmaxtemp":65,"solarpumpmod":0,"pumpminmod":1,"turnondiff":8,"turnoffdiff":5,"cyl2bottomtemp":22.9,"cylpumpmod":0,"valvestatus":"off","cylheated":"off","collectorshutdown":"off","collectormaxtemp":120,"collectormintemp":20,"energylasthour":0,"energytoday":0,"energytotal":5488.6,"pump2worktime":0,"m1worktime":0,"heattransfersystem":"off","externalcyl":"off","thermaldisinfect":"off","heatmetering":"off","activated":"on","solarpumpmode":"pwm","pumpkick":"off","plainwatermode":"off","doublematchflow":"off","climatezone":85,"collector1area":4,"collector1type":"flat","collector2area":0,"collector2type":"flat","cylpriority":0} Which is great. Thank you very much A (very) minor point is that if we are using "prioritycyl:cyl_1/cyl_2" the returned values...

@MichaelDvP All good. Thank you.

@MichaelDvP would it help if I uploaded this version too?

All good at MQTT and Telnet. And it's a lovely sunny day here too! 

> In my opinion it would still be better if you could somehow drill some holes and add wiring to put the thermostats where they belong, so the system regulates...

I will be very interested in your thoughts. My primary heating for hot water is solar with my gas boiler there to heat it if there isn't any sunshine. In...

I should add that using the daily values works out of the box, but I have create a Feature Request in HA. https://community.home-assistant.io/t/energy-management-solar-pv-input-to-extend-to-solar-thermal/387145.

@Webreaper I just added this integration and it seems to be working. First step was to manually add the custom-card (as per instructions) and then use file editor to write...