Peterthegreat
Peterthegreat
GUI link is down
Hi, Try this: disconnect the USB and give it a go on battery mode. Also, make sure that logging is set to OFF
@yaxax Take a look at #126 . I didn't worked on Git, so the code is lost for now. Good luck
Autocalibrate is part of the reading process, it sets the correct threshold according to the current card. The emulation is not affected. - try another reader - try battery mode...
Hello @maxieds Didn't tried your app yet(stupid custom fw on my phone), but i'm looking forward to do that . Great work btw! It looks like the pads are not...
> Will it work to solder a pinned out USB cable to the big pads with lots of solder already on them? If you want to go with that option,...
Any update on this issue? Using live mode gives bad nonces (compared to battery mode)
Yes, I did check the latest version first. But I have to fix issue #131 first as I have a pretentious reader. I will get back to it in a...
Hi Mica, Which command did you used for socat? Try "socat -,escape=0x0f /dev/chameleon,rawer,crnl" . [opens an interactive connection via the serial line, e.g. for talking with a modem. rawer sets...
Please provide the log from the emulator. (Using software/chamlog.py)