Pedro Caetano

Hide webcam if connection to stream fails

3

**Is your feature request related to a problem? Please describe.** I don't "always" have a webcam connected to the printer. When I don't, there is a large, unremovable warning in...

15mm and 20mm larger cartridges and lids

Whilst slicing, it is shown that the bridges for the slot holes are not on a flat plane, which causes issues when bridging and printing. Nothing that can't be fixed...

Will Spotify support be added, given recent Google Assistant updates

1

Per the release of Google Mini and new updates to Google Home (Which adds Spotify support) - Will this become a feature here considering we have no obvious way to...

I am wondering if the default response object could include the "default" units to use alongside response.value.magnitude? i.e., a response of "92 kph" has a response,value.magnitude of 92, and a...

## Version of the custom_component 0.76 - Latest ## Version of OpenHASP running on plate openHASP 0.7.0-rc15 ## Configuration ```yaml - obj: "p1b31" properties: "val": '{{ 1 if is_state("light.bedroom", "on")...

### Perform all steps below and tick them with [x] - [x ] Check the related part of the [Documentation](https://www.openhasp.com/) - [x ] Update openHASP to the latest version -...

Duct face is unnecessarily thin

2

Although what could be partially blamed on my cheap fan or printer calibration, I have found the fan ducts to be a bit weak during assembly and crack if the...