Paul Clark
Paul Clark
Hi @csomyy , It looks like you are trying to log RAWX data at 10Hz? The code may not be able to keep up with that data rate. Please try...
When using the [SparkX board](https://www.sparkfun.com/products/17115), you do need to pull up the WP/2 and HLD/3 pins (if you are using standard SPI) otherwise it will fail to communicate. Best wishes,...
Thank you Paul - much appreciated! Very best wishes, The other Paul
Hi Paul (@paulvha ), Thanks again for all the help you've given us on Artemis and Apollo3 - it is very much appreciated. Just looking at the interrupt pull-ups again,...
Thank you Paul - again, very much appreciated, Very best wishes, Paul
Nice one Paul - thank you - I'd missed that discussion. Very best wishes, Paul (ZC)
Hi Paul (@paulvha ), I suspect this could also be the root cause of #412 (disabling the Wire IOM) too? Do you know if there is a way to manually...
Hi Adam ( @adamgarbo ), I did indeed... On OpenLog Artemis: https://github.com/sparkfun/OpenLog_Artemis/blob/c5c2947dad2f7199718a62bf57462e3db2965dcf/Firmware/OpenLog_Artemis/OpenLog_Artemis.ino#L109 I haven't had time to investigate further... Cheers, Paul
PS. your Forum Post link is broken. ;-)
Possibly also seen here with u-blox GNSS modules. @paulvha suspects SMPCNT too: https://forum.sparkfun.com/viewtopic.php?f=168&t=55659&p=225605&hilit=smpcnt#p225605