Patrickyp
Patrickyp
Hi kris, If using not using passthrough mode, you can do the figure 8 anytime the sketch is outputting data to calibrate, while passthrough mode the calibration is done at...
I am getting the same problem where it gets stuck at scanning sometimes. I would have to replug the usb cable from teensy to laptop and it seems to fix...
I changed the usb cable and seems to have same problem. Any chance it can be the connections with the pins? I am using a cheap breadboard.
Any update on this? Would love having the ability to validate a input file before parsing it into poco.
Thanks for clarifying. Right now I need to figure out when reading Edi element if the field was blank or if the formatting was bad e.g. letter in a number...
Now I have the following error on my server side: > /home/pi/gitlibs/inetdgram.cpp:88: inet_dgram_rcvfrom() - recvfrom() failed -- could not receive data from peer! (Success!) Client seems to be running on...
picam_sequence() seems to capture first few images from same camera but after that changes the camera every image reliably. Why is that?
I also have this question. I need images to be less than 30ms apart from 2 cameras.