Paul Wintour comments

Results 17 comments of


                                            Paul Wintour

Components should output all the geometry options after orientation study

Hi Mostapha The other thing that I think would be useful was if there were 2 context inputs. Often I use the sunlight component to evaluate hrs of sun on...

Components should output all the geometry options after orientation study

Hi Mostapha I had another look at the orientation study and can't see how this is possible. When you say use parameters, do you mean the 'orientation study parameter'. Also,...

Components should output all the geometry options after orientation study

Hi guys. Any luck with this? And Mostapha can you upload that example pls

FaceAnalysisDisplay.ByViewFacePointsAndValues node only works on single surface

@ksobon This is a parallel topic. Any ideas of why this is failing and any suggestions on better workflows? https://github.com/ladybug-analysis-tools/ladybug-dynamo/issues/18#8 #

Code block outports corrupt

Not really sure what else I can add.

CurtainPanel.ByElement unreliable

Still an issue some 9 years later...https://github.com/DynamoDS/DynamoRevit/issues/3043

“trim_with_edge_loops” error

@Amoursol When can we expect a resolution to this?

“trim_with_edge_loops” error

@Amoursol it does appear to be fixed in Dynamo 2.16 but I'm on Revit 2021 so that doesn't help me much. Any reason this hasn't been implemented on Dynamo 2.6?

Custom selection expander not showing

There issue here has to do with the length of the value.When will this be resolved?

Dynamo crashes switching from Auto to manual mode

Note, the crash doesn't happen upon changing the run mode, it happens as soon as you modify any wires to a node.