Marinus de Beer

Same here, my TFT 35 v3 screen is quite new and all of a sudden doesn't want to connect anymore. I haven't done anything to it. Earlier today it suddenly...

> > > I have just done a quick test and it seems to be working O. > > Can you check the log under schedule after you have done...

> Hi, the Gcode generator used here, does it exist separately? I would like to be able to use it for svg created outside of d2s. With a bit of...

> > > thank you very much for your answer, I used to use the inkscape gcode generator but lately I am working very heavy svg so inkscpae takes too...

Hi @Scott-Cooper the wiki is still empty as it stands. I'm quite curious about the crop. I'm also very much looking for a way to invert the Y-axis gcode for...

I'm surprised there hasn't been a report on this before. I can confirm, for me the `Auto Orient` function hasn't worked in the last full release. No matter what kind...

> OK, I went down a massive rabbit hole on GPIO and Raspi only to learn that newer kernel builds have changed the GPIO handling mechanisms, so the old ones...

> [@Ohmarinus](https://github.com/Ohmarinus) - Mine's been running since I got it working initially. > > Can't guarantee I can help, but what pi are you running (raspi 3/4/5?) also what version...

Just to add, I made a 2nd SD card with the newest version of everything: > octoprint.version: 1.11.2 > env.plugins.pi_support.octopi_version: 1.1.0 > env.plugins.pi_support.model: Raspberry Pi Zero 2 W Rev 1.0...

Good news; I fixed it. I'm a bit of a noob and didn't know I had to manually install lgpio as well :) Going into the env and sending this:...