Tom
Tom
I'd like to be able to long press the GPS coordinates in the nodes list and copy it, rather than just a link to my mapping app.
### Category Other ### Hardware DIY ### Firmware Version 2.3.4.d8866e90 ### Description I set PIN_GPS_EN to pin 24 in variant.h, and see that it remains HIGH no matter the GPS...
### Platform Cross-Platform ### Description Nodes would benefit from a "status" in the same way that other chat platforms have a user status, e.g. Available, Away, Busy, etc. However, Meshtastic...
Also added an extra full-writing of Public Key Cryptography (PKC) to make it clearer and mirror the PSK section
### Platform Linux Native ### Description The RF switching for the lr11xx is not currently supported by the config.yaml files. Adding support would require at least two different configurations: the...
### Contact Details NomDeTom ### Tell us your idea. I'd like the app to use an unprintable character to turn the following word into a hyperlink that can be tapped...
This PR condenses the process of building a single firmware in github actions down to selecting the branch and inserting the variant. Additional checks are inserted to ensure that a...
Currently even well-placed `router` nodes represent a risk to local mesh working, because they pre-empt all other retransmissions to yeet the packet as far as possible, and don't take account...
This PR is a tidying up and extending of the defaults for the Xiao NRF, to allow each of the variations in use to coexist harmoniously whilst also sharing a...
Currently nodes only take account of their own airtime and ChUtil, and the number of recently heard nodes, for deciding whether to throttle their routine telemetry and position packets. If...