NilsRo
NilsRo
Same issue here. Like to see it running but as this is open for a long time...would like it I am sure. :-)
Hi, I still got the behavior of the PSOk. It has 3 states officially but only switches in between 0V and 3.1V (weak pullup). So I connected it to a...
Hi Joao, I am using a 5V arduino nano and also ADUM1250 to get both PSUs used isolated. In that configuration I have also no problems reading the PSUs data....
Every PSU will have its own PCB and communication is done isolated with ADUM1250. So nothing is shared in between. You can see that PIN 27-29 are pulled down to...
I finished a circuit in frizing but has issues with power lines. Has to recreate it in eagle and now I hang. 😄 Have to learn eagle myself but still...
If everything fine? Have a ESP32 here and like to connect it to my KNX at home to control a dehumidifier, but your change is still not in the master...
Yes, there is a 403 error visible which matches the plugin. 
Yes. Found the issue. I installed vpn bridge as well as there are more options for configuration. vpn client is also installed but I switched to bridge for flexibillity. So...
If I stop Softether Bridge and start Softether Client it is working fine. I saw this as only Softether Client is listed as dependency. Will perhaps think about switching to...
Very good description... 👍 So the same problem with permission as with my plugin. :-) Will change the issue title later that it is not generic problem but still one...