Nathan22211

Only tried it with MCA reborn, but I'd imagine it's similar with Origins. The menu is still usable but not easy to read at times

I'm trying to fix it by writing a wiki myself but you can't PR those, unfortunately. You can clone it on my fork with this link: https://github.com/Nathan22211/3DPrintColorizer.wiki.git Mind you I'm...

This way the markers can be grabbed, but you can still print at their full height. Should fix issues with some direct drives as well

Suggestion: have a double sided holder for 12 markers

1

This should be doable on most gantry printers, as that's usually in the middle of the printer, but this will require calibration for the other side with a Y cord...

it appears it can't find one of its own classes

1

https://pastebin.com/aC3YQsCd log (from last crash) crashes on server tick loop had this three times. This seemed to have happened after I added some mods, but the only mods I have...

**Is your feature request related to a problem? Please describe.** looking at current issues, there's no day to control mixing hotends via octodash **Describe the solution you'd like** some way...

Allow different parts of a multi colored slice to be assigned to different G-code injects

1

### Is your feature request related to a problem? My Zonestar printer has a 4 in mixing hotend, meaning there's at least 16 possible color (or coextrusion) combinations. Due to...

Parts of chunks below a certain Y level refuse to load regardless of graphics settings

2

### Version information 0.4.4 build 18 ### Expected Behavior Chunks should load as normal ### Actual Behavior Portions of chunks below a certain Y level don't load ### Reproduction Steps...

some items can't easily be put into pyrotech's worktable

2

I tried this with an oak sapling to make wooden shears, but I could only put them in the bottom middle instead of the center, no matter what I did.

the off-hand attacks are the main reason why people use the mod