N6RFM

Sounds like a plan. Thanks Dani. Will QRX.

Hi Dani, As I've mostly been using gr-satellites under GNU radio 3.9, I was surfing around to see if there had been any updates to gr-tnx_nx. It appears that one...

> Hi Bob, > > The person doing the modifications to the repo is me :) So far the aim of my project is only to add support for GNU...

Hi Dani, Correct. Data was from different runs. Just re-ran the RHW wav file into the satyaml and v3-alpha4 /apps flowgraphs at the same time using parallel UDP streams. Other...

Hi Dani, Looks like this topic is bumped to gr-satellites 3.7. Thanks. FWIW, here is a link to a short IQ file for UPMSat-2 which may be of use. https://www.dropbox.com/s/elpbzudl7gbyz32/upmsat2_437.405MHz_50Ksps_29Nov20_145400Z.raw?dl=0...

Hi Andy, Always good to hear from you! I'm not sure we are seeing all of those inits. We have been looking in debug mode. But, I've cc'd Mike so...

What's missing is when you select a mode that requires split to be off it doesn't turn it off.I've made the modications in hamlib so that when "U VFOA 0"...

https://www.dropbox.com/s/9hdg11g3tfy43xr/patch.txt?dl=0 This is Mike W9MDB -- we got gpredict working very well with the IC-910. The above patch allows switching the IC-910 between satellite mode and split mode and automatically...

Thanks Scott for figuring this out! What's really interesting is that up until a few days ago, our GreenCube spots (which had the checksum) were listed on the Satnogs Grafana...

Hi Paul, Ideally, setting 0.0f to 1.6f would enable the TCXO. Unfortunately, that is not working. The chip developer has provided test code, shared with 4M1GO, in which the TCXO...