Mrdindon
Mrdindon
> Hi @Mrdindon you can call it using POST method. Please check this comment (and comments below): [#138 (comment)](https://github.com/bugy/script-server/issues/138#issuecomment-461331583) > > Would that work for you? Thanks, yes I saw...
never mind... I had to install libboost-thread-dev Maybe adding this to documentation ? apt install libboost-thread-dev
Dunno if this is the same issue but I can't map my google drive also : 
Would you be able to helpme with that ? I'm not able to receive any proper signal from the pump.. I only see a bunch of 0x00 every seconds from...
Thanks for your reply. I was able to "talk" with the drive and make it run at a specific rpm but I had to disable the pump display by putting...
In the meantime, I've done a working solution based on the relay support of the pump using a Sonoff 4chPro module that allows me to control it over wifi and...
Yup, I'll have to look for this... Do you know how far you can run that kind of pump dry ? It's now inside my house so that I can...
Just completed the sniffing.. in case someone need it. I tested it and it work : OFF | 01 01 00 00 6B 0D 0A 600 | 01 01 58...
It should be the same protocol as pretty much all there pumps uses the same rs-485 controller.. My pump is a SP2603VSP. Keep in mind that you have to send...
> Any chance you could share your work on this? I'd love to smart up my Hayward TriStar VS to a Sonoff! check if that helps you: http://www.mrdindon.com