Marco Visin

It would be great to have it. If it's easy...that will help me a lot :) I know Direct Play has nothing to do with PRT, that's already a good...

But actually, exactly because > If enough things hit the same relay, it could harm network availability, which is our top priority. I would try to setup some sort of...

Hello guys, I tried to add a certificate with subnet 0.0.0.0/0 and then adding to the config of the client the following: - route: 0.0.0.0/0 via: 192.168.xxx.xxx Unfortunately the route...

I can confirm, same behavior on iOS 13 as well.

Hi @yarrick, I'm currently building my executables against the latest "master" branch commit here. I also tried pre-compiled binaries but no luck. I do not get any error message. I...

@yarrick I believe the server is not getting much Here is a tcpdump from the server ` 20:50:42.488312 IP CLIENT_HOST.49404 > SERVER_HOST: 15559 [1au] NULL? yrb2g3.i.xxx.ch. (46) 20:50:42.488358 IP SERVER_HOST...

And here is the client side: `20:56:52.712790 IP CLIENT_HOST.61189 > SERVER_HOST: 22800+ NULL? yrbhd4.i.xxx.ch. (35) 20:56:52.741116 IP SERVER_HOST > CLIENT_HOST.61189: 22800*- 1/0/0 NULL (95) 20:56:52.754140 IP CLIENT_HOST.61189 > SERVER_HOST: 30527+...

> Was the shown server address the expected one? Oh sorry I forgot to answer this. --> Yes, the server address is the correct one.

> Is the `SERVER_HOST` the same as where the client is trying to log in with raw mode? From `Server is at xxx.xxx.xxx.xxx, trying raw login` Yes

This is the tcpdump command I executed, I think it should be correct. ` sudo tcpdump -i eth0 udp port 53` Do you want me to run it differently?