Darren Lines
Darren Lines
Have you uploaded the fonts? I'm almost betting no and closing the issue now 🤣 You need to upload the fonts when you change firmware (BetaFlight or inav for example)...
Firstly, this isn't work. I don't get paid for it. Secondly, 99.9% of the time, when there is something not displaying correctly on the OSD, it is because the font...
That is the wrong font. You need to go to the Font Manager at the bottom of the OSD page and upload the correct font to the flight controller.
All the fonts are the same as far as characters go. Perhaps the first 2 uploads failed?
You shouldn't be limiting in the transmitter. You should do the limiting on the outputs page in iNav.
Personally I would only use the mixer for mixing. Each control surface would total 100%. I would set weight and endpoints on the outputs page. But only when they can't...
The mixer mixes how the different control surfaces mix with each other. The outputs determine the limits of the output devices. In that respect, you can think of them the...
> Isn't that checked by `navigationIsControllingAltitude()`? Ah yeah. Missed that in the preview on my phone.
This was on a Vector I was using. Only I didn’t set it up or know about it. It was very confusing when looking for the model and it appearing...
> Setting a second OSD screen without coordinates is easy I know that. I only have coordinates on my default OSD. If I !FS! It automatically switches to the default...