LDOVoronTrident

LDOVoronTrident copied to clipboard

Config for LDO Trident Missing pullup_resistor config

1

When using the LOD config at defaults for the hotend sensor type the hotend thermistor reports 3x higher than ambient temperature. Adding the following to the extruder section allowed for...

ehrenhasz

LDO Trident kits come with TR8x4 leadscrews, so set rotation_distance: 4 for stepper_z/z1/z2

thunderkeys

CMFB103F3950FANT is used as the sensor type for the chamber thermistor but its definition is missing from printer.cfg. This PR adds it in, copied from Nitehawk-SB klipper config.

thunderkeys

Updated line 1, comment reference 2.4 instead of trident.

dremc