MichaelPWalter
MichaelPWalter
Same issue today. Running on RPi 5 using Bookworm 64-bit. I believe the issue lies with NumPy 2.0. I will try to downgrade my version of NumPy to 1.26.4 once...
I have tried connecting to RPi with ssh and running `sudo apt install python3-numpy` but this had no effect. I will reinstall BirdNet pi from a different fork that advertises...
I've analyzed the chip in accordance to /info/ubuntu/diy.txt as follows. This can be seen as /info/ubuntu/heltec_v3.txt `lsusb Bus 001 Device 009: ID 303a:1001 Espressif USB JTAG/serial debug unit Bus 001...
I will have to try that :)