MatNieuw

I have (finally) built it using autotools, as a normal executable. I want to use this to make an AppImage on aarch64 and armhf . Because this is intended for...

I stand corrected. There is a LICENSE.txt file (MIT license). I shall include that.

I have built an autotools version as normal executable, suitable for aarch64. It is not an AppImage. I can send you the code, if you want.

I use BIT to backup to an JFS partition, because that supports 64k xattr, and some of my partitions are OS/2, and have some programs using almost the full 64k....

Update: I found an un-terminated acivity at 2017-02-02. As soon as I include that day, Hamster shows the incorrect hours. The reporting period was set from 2017-02-02 to 2017-02-02 ,...

Sorry, main post had bad format, and cannot change it.  [relay_clock_generator_bad.txt](https://github.com/user-attachments/files/18269127/relay_clock_generator_bad.txt)

Indeed, that made it work. Thank you. Strangely, if I delete part of the bottom line between left (below the 150u C) to the connection left of the voltage source,...

It works for me, same software version. Did you use File->Create Subcircuit, and is the subcircuit visible in Options->Subcircuits? It is not related to issue #143?

I noticed that if I start circuitjs from the file manager, with the circuit name on the cmd line, the file name is not shown. But if you use File->FileOpen...

I have since noticed that the file name is visible in the right vertical tab under "Current Circuit" only if you open the file using File-> Open, if you start...