MarkGodwin
MarkGodwin
I noticed that the side effect to PR #2049 is that it introduces an at least 1 second delay before the message is re-transmitted, and could potentially be much worse...
I've been experiencing issues with the inclusion of the above device. I can control the device correctly, but updates from the device such as power levels and changes due to...
## Proposed change This adds switches for the configured WAN ports on the TP-Link Omada Routers/Gateways to allow HA to connect/disconnect the router from the internet. There is a separate...
In my test setup, I have five Qubino dimmers connected to the Hubitat. After a few attempts, I got these appearing in Home Assistant by publishing them as Dimmers, Lights...
## Proposed change A long requested feature from the forums. Device trackers for client devices attached to the TP-Link Omada network. I added both scanners and trackers, both of which...
## Proposed change Documentation for the addition of device trackers in TP-Link Omada integration. ## Type of change - [ ] Spelling, grammar or other readability improvements (`current` branch). -...
## Proposed change Second attempt at this PR. Remove devices that no longer exist when the integration loads. As part of this, I added a new coordinator that tracks the...
## Proposed change Add basic sensors for all Omada devices. Device status reports an enum status code for each device. Memory and CPU usage sensors report a percentage. ## Type...
## Proposed change Documentation for the addition of sensors to the Omada integration. There are also a lot reported issues about 2FA problems, so I added a note about not...
There are significant problems when executing queries that either convert nulls in the database to non-nulls in code or vice-versa. Therefore, we have marked this feature as internal for EF...