Magnus
Magnus
Yes. Example IF value=1 THEN show text ON IF value=2 THEN show text OFF IF value=3 THEN show text xxx
Waiting....
@cap60552 - There should be available 370 ohm 0602 size resistor, I just goggle it and found a number of suppliers! However a 470 ohm resistor should also work fine,...
Since that display is different than I developed the code for you need to go back to the basis. The only way I figured out was to study the communication...
If you using the https://github.com/MagnusPer/Balboa-GS510SZ/tree/main/examples/Balboa_GS_Read example and try increasing the temp by enter “1” in serial console, does anything change on display?
Hi and happy that you are interested in this library. Firstly, Have you set your credentials in the code for the MQTT broker?  If so check that MQTT messages...
Sorry, I do not have HA instead I use Homey so the integration to HA using MQTT I can not help you with
@duczz - Between the display and the control system there is a cable with an RJ45 connector. Disconnect that from the Control system and place PCB in between. You need...
Sorry, I don’t have the knowledge how the Home Assistant works. The library support the “Mode” button and what I see is included in the HA example. The only missing...
> Hi @ALL, just a dumb question ;) and sorry to reuse this chat... I've already built the circuit on a stripboard 🙈, but now I'm thinking about, how I...