M3HNGRY

set_logo_leds_off and set_nozzle_leds_off doesnt work

1

I have the led effect install with the SB cfg and set_logo_leds_off/ set_nozzle_leds_off doest work.... Logo and nozzle has the effect working just fine.

Override variable for Filament Pull Back at End/Cancel of Print.

1

### Describe the feature or hardware support you'd like I have a Revo Hotend and would like to have an override variable for filament pull back at the end/cancel of...

Add BigTreeTech SFS V2.0 support

19

This is just to track and not forget for the next version to add this: https://github.com/bigtreetech/smart-filament-detection-module ``` [filament_switch_sensor switch_sensor] switch_pin: gpio_xx pause_on_runout: False runout_gcode: PAUSE # [pause_resume] is required in...

TACH on SB22** Boards does not work.

4

The tach does not work on the SB2240 with 9200rpm 4wire 5015 fan. My slider works but rpm/tach doesn't change. 😦  RED = 24v, Black is Ground, White =...