Module_17
Module_17 copied to clipboard
M17-Project
M17 modem board for 9600-baud capable radios
I noticed that a board I got in, has a female connector mounted, which causes some pin-numbers to be wrong. I use a GM950 Motorola, and that seems to work...
Clearance around 3 of 4 mounting holes is not sufficient to add washers or to use a wrench to tighten the nuts.  In case of a PCB redesign please...
Module 17 Revision 1.0 I was able to assemble the Main PCB and HMI PCB into the case, but the switches on the HMI board do not work properly. Down...
Maybe I was having an off day but the directions on adjusting the TX could be clarified. I picked up a board and was trying it out with another ham....
Thanks for your inquiry, here is a question for project No.W840681AS4C6_Module17_Rev_1.0.zip Based on our company's capabilities, We need the spacing to be at least 0.19mm for green solder mask bridge....
