M17 Rev 1.0

[toshi-cxh]

Module 17 Revision 1.0

I was able to assemble the Main PCB and HMI PCB into the case, but the switches on the HMI board do not work properly. Down button -- works as Enter Right button -- works as Up Enter button -- works as Escape Only 3 switches respond, and the other switches, including Power, do not respond.

I assembled a second set, but the situation was the same as the first set. The firmware written to the main board is: v0.3.7-1-g031ecda1d

Since it is not possible to write a callsign, I removed the HMI board, attached the OLED 1.3 inch module used on the previous board (Rev 0.1d/e) to the main board, and was able to set the callsign. . The main board only seems working properly.