Loretomes

Hi, I'm facing the same issue on RD200 (Firmware 2.0.2) $ bluetoothctl trust E8:31:XX:XX:XX:XX Changing E8:31:XX:XX:XX:XX trust succeeded $ bluetoothctl connect E8:31:XX:XX:XX:XX Attempting to connect to E8:31:XX:XX:XX:XX [CHG] Device E8:31:XX:XX:XX:XX...

Hi dicer, - python version 3.9.2 - bluepy version 1.3.0 It's running on a raspberry pi 3B, if this means something. EDIT: I've installed additionally python 2.7. Same behaviour: $...

Thanks for taking a look on this. Yesterday I edited my last post. I've tried python 2.7.18 too, sadly with the same result.

The smartphone app shows firmware version 2.0.2. Which version do you have?

> I have the app but can‘t find the version. If you connect with the RadonEye App the firmware version is shown at the bottom screen as 'F/W: V2.0.2'. I'm...

[btsnoop_hci_20220816.log](https://github.com/ceandre/radonreader/files/9384605/btsnoop_hci_20220816.log) I've uploaded the trace. I filtered only the traffic between smartphone and RadonEye and could export it without IP or mac addresses. Wireshark shows the smartphone as localhost and...

Thanks a lot, Tofnet! With the help of nRF Connect app I can read out the value in Bq/m³. But why radon_reader.py reads zero Bq/m³ at UUID 00001525-0000-1000-8000-00805f9b34fb? ``` uuidRead...

Yes, I guess the same. So I experiment with this code example: https://ianharvey.github.io/bluepy-doc/notifications.html#notifications However, I lack the knowledge and experience :-(

Hi Tofnet, glad you found this. Thanks, it works.