Loak
Loak
Hi, I confirm the same behavior on the same card. On my side "no_sync_on_arm" is NOT activated in the TX module. ELRS 2.5.1 4.3.0 = OK 4.3.1 = bad ELRS...
In the Discord chanel V-22 asked me the results of "DMA show" and "Timer show". Here they are. We can see some differences between version 4.3.0 (which works normally) and...
Hi @SteveCEvans, as I'm using the same backup with BF 4.3.0 and 4.3.1, LED_STRIP is activated by default in 4.3.1
@FabianIsensee @SteveCEvans I confirm that disabling LED_STRIP in the BF Configurator solves the problem. As it is the update to BF 4.3.1 that activates the LED_STRIP, not the user, can...
Thank you gentlemen.
@Asizon , Yes, I understand that it is not a priority but in a more or less close future it would be interesting to be able to use Betaflight-Configurator by...
Thank you, Is configuration reported to work fine thru OSD in BF 4.3 RC6 and CrazyBeeF4SX1280 ?
Hi @klutvott123 , I've tested this morning with OSD and all I've tested (PID & Rate) work fine. I'm at 50 Hz / 1:8 telemetry ratio. I've rechecked the issue...
@klutvott123 I don't if I can interfere in the pull request #11573 as it could be reserved for devs so I do it here. I've upgraded the FC with the...
@3d-gussner , In the step 4 of your first post, isn't it "if step 3 fails" rather than "step 2" ? because it appends to me : changing the firmware...