LeeWiu

Add version to manifest file, should look like this: `{ "domain": "google_geocode", "name": "Google Geocode", "version":"1.0", "documentation": "https://github.com/michaelmcarthur/GoogleGeocode-HASS", "dependencies": [], "codeowners": [], "requirements": [] }`

Download dl.dasker.eu links are down, use this alternative https://github.com/yaourdt/mgos-to-tasmota/issues/95#issuecomment-1435643550

https://github.com/pvvx/ZigbeeTLc/blob/master/z2m/lywsd03mmc-z.js is not working anymore after updating to Z2M to 1.36.1-1, I get Unsupported device. I tried to delete and add again, same thing. I even added a new device,...

I updated the file and it's working now, was a small change about 20 hours ago, I'm not sure if this was the culprit https://github.com/pvvx/ZigbeeTLc/commit/6d8e14b7bd2173350448420e8f5aa4b124c34fb4

https://github.com/Koenkk/zigbee2mqtt/issues/22384#issuecomment-2091447905

This will be fixed in the next release, but until then use manual rename https://www.zigbee2mqtt.io/guide/usage/mqtt_topics_and_messages.html#zigbee2mqtt-bridge-request Go to Settings / Devices / MQTT / Configure and input Topic: `zigbee2mqtt/bridge/request/device/rename` Payload: `{"from":...

> I actually found a copy of the file on an old PC and flashed it OTA. Ended up with a semi-dead Dimmer 2 that I needed to get out...

I compiled the 1000 version and tried to flash but same error, should I upload only tasmota-to-mgos.bin from zip file or to extract all files and create an archive in...

I flashed a Shelly 1L with v1000 via serial and I get a hotspot named mg-xxxxxxx, then I connect to it and flash a shelly original firmware with success and...

I ended by flashing devices by serial because no more wifi connection.