judgeofwings

Improving the GUI -> check ;)

 You have to set Parameter $37 = 1 which activates the Flame detector.

I think you have to update the dlc32_config.txt, because that´s not a standard setting in the normal grbl Firmware. That might be part of the "custom" Firmware Part of MKS....

Is the Controller turned on or also off? When the stepper motors are moved the induce voltage and when you have two seperate Power Supplies and they are not well...

Yes, i would reccomend you to try this.

Why can´t you change the HMI, that whan you push for example X+ Button the Laser drives till you release the Button? Some fine tuning Buttons for small stepps and...

Here two short Clips to show the Homing issue. You have to download them, the are H265 compressed and Github can´t handle that. https://user-images.githubusercontent.com/99832588/177936465-789623b7-a3bc-47fa-8b60-76a7920d15d0.mp4 https://user-images.githubusercontent.com/99832588/177936509-f73d3d6f-e93b-4886-bd1f-80ad5b099fb3.mp4

[language_de.txt](https://github.com/makerbase-mks/MKS-DLC32/files/8102333/language_de.txt) I made a German translation. What is meant by the Roller Mode? I was not sure about what that means? And another question, what is the difference in the...