Kuba
Kuba
You need to compile librpitx first, it should be in the src dir (`src/librpitx`), go to that dir, here are quick instructions: - go to the dir with rpitx -...
@Pico1991 should work, the range is 0-7
you could use my fork of rpitx (and it does have pifmrds, with better rds encoder and better control over transmission,but for now the code is made for the pi...
Instaad of pacat and sox, use parecord, so you'd type: `parecord -d 0 --latency-msec=50 --raw | sudo ./pi_fm_rds -audio -`
for anyone that pifmadv isn't working you can check my fork of rpitx "rpitx2" (it has pifmrds, with the same rds encoder as pifmadv has), for install just follow the...
> > for anyone that pifmadv isn't working you can check my fork of rpitx "rpitx2" (it has pifmrds, with the same rds encoder as pifmadv has), for install just...
> > > > for anyone that pifmadv isn't working you can check my fork of rpitx "rpitx2" (it has pifmrds, with the same rds encoder as pifmadv has), for...
implemented a stereo pilot volume now > > There isn't a branch, i have implemented one of the stereo tool's features if you wanna know (rds volume, it cant take...
it's experimental, so something may not work
Probably no, as the gpio pins won't be driven by the cpu but the RP1 and it have diffrent addresses to stuff and so it won't work (you'll need to...