Peter Brittain
Peter Brittain
The ESP-AT documentation is slightly incomplete. AT+CWDHCP=1,4 WILL set the Ethernet DHCP bit, but it is missing from the documentation. (Show in in status but not mode) However, with DHCP...
I have now rebuilt the project with the current version of the repo & using the ESP-IDF version that comes in the project folder. It behaves the exact same, everything...
Ok it continues to get interesting, I pulled out a fresh one, and it comes with firmware on it already. This firmware seems to work flawlessly (though I can not...
To be clear, the first log is from the firmware that comes STOCK on the device, it was built by the manufacturer and I can not replicate their success. As...
I have finally got the Ethernet demo working, I was correct, the reset_gpio_num needs to be set to 16 for this device.
Ok, continued update. I have now successfully gotten ESP-AT to work with the Ethernet on this device, HOWEVER, I have to reset it over and over to get it to...
I was also hoping to be able to do this, I came to post an issue, but it seems that there are already several about it, so I will just...
Interesting, I see what you've done. It shows the circles, but the tooltip stays the same, I will see if I can fiddle with the tooltips to make the same...
I also have interest in this, some way to update all the peer dependencies, either similar to up, or as an option would be very nice as currently there is...
I've noticed that the Harvester's Scythe doesn't get tracked at all, the crit chance or heal *correction* I just tested it, the crit does appear to be tracked, but the...