Kanken6174

I have the exact same issue, the module will not initialise on I2C or SPI, it gets stuck on init call

Actually this was solved by using PlatformIO instead of the arduino IDE, no idea what happend there 🤷

after skipping the test it fails. It seems that this library just won't work with the 6050A chips, only the 6050, even though they're supposed to be functionnally the same....

 This is your lib, running the Seimpl_MPU6050_Basic_Example on the 6050A (it goes on forever)  And this is the genuine 6050 running the same code after 3 seconds

 Original log of the 6050, as you can see the WHOAMI address is different.

I have found the underlying issue, the mpu6050A is actually not an invensense MPU6050, but a TDK ICM-20689, which does indeed have a WHOAMI register value of 152 and not...

The performance of this package is indeed quite slow, don't overuse it or you might freeze your UI for a few seconds. (my project had ~20 gifs in it and...

I've encountered this issue too, the fact that we can get the pose from other devices with their handle from openvr-driver.h but not any information about them that could help...

i somehow wonder... Buying the dlcs download new meshes files for the skins that are 500mb for each, i wonder if there is an activator in there that says if...

yes you're right i didn't notice at first. That means that unless we use some kind of duplication/forced exchange of the key item, we cant get the paints... too bad