KangKai1982
KangKai1982
实测可以安装自定义分辨率，但是并不能打开hidpi，还是糊的
Yes, it works fine with home-assistant itself.
OK, here it is. ``` 2018-08-23 07:38:18 DEBUG (Thread-6) [homeassistant.components.homekit.type_thermostats] climate.mi_acpartner4: Set heat-cool to 2 2018-08-23 07:38:18 DEBUG (SyncWorker_7) [miio.device] 192.168.1.231:54321 >>: {'id': 315, 'method': 'set_power', 'params': ['on']} 2018-08-23 07:38:18...
just tried with target temperature set to 17/19/20, it does not help.
sure, here it is with target temperature set to 20 > 2018-08-23 15:28:45 DEBUG (Thread-7) [homeassistant.components.homekit.type_thermostats] climate.mi_acpartner4: Set heat-cool to 2 2018-08-23 15:28:45 DEBUG (SyncWorker_2) [miio.device] 192.168.1.231:54321 >>: {'id': 3,...
I noticed if I operate in home-assistant webui, which works fine, the miio compontent only send 1 "set power" command instead of 2 "set power"&"send cmd" below is the log...
same here. Issue exists with home assistant native HomeKit .
Just tried on the Dec. 31 version, sent 3 commands instead of 1 when change state in homekit.
I have same issue with Gree 10727.
You can simply replace the index.js file with pponce's version.