Joan Lluch

Please optimise the SSD1306Ascii::write(const char* s)

6

Please replace your existing code for the write(char*) function by this!. The use of strlen() for no reason in your original code just drives me bananas :-) That's my suggested...

You use an interrupt to determine the time to change to the next frequency. However the actual frequency change is performed on the main loop. I understand interrupts are used...

Bug report: Layer depth on circuit Appearance not honoured after save

3

Hi Kevin, I hope you are ok. I found a bug on the circuit appearance. I place visual elements one on top of the other by means of the commands...

Feature Request. Native version for new Macs with M1 (arm)

2

Hi, It would be nice that a downloadable native version is provided for the new macs with the M1 (ARM) chip. I performed some research and found that the JavaSDK...

Performance Considerations

5

Hi, there's little doubt that raw simulation performance of your fork is much better than any other fork. Still, I noticed that performance degrades _sharply_ and significantly after I reached...

Minor interface glitch (tick on Auto-Propagate menu item)

4

Hi, I have tested your fork in a quite large project and I found with great satisfaction that your version feels and **is** _much_ faster than any of the previous...

I found that Rule Areas are not taken fully into account to prevent via placement in undesired areas when running the plugin "only under selected zone". The tool will avoid...

While using this plugin I found that vias are placed inside the boundaries of "Mounting Hole" footprints, creating design rules errors

Feature Request: Infinite canvas and individual zoom settings per circuit

1

I wonder if an infinite canvas could be implemented on Logisim I mean, instead of circuits behaving as anchored to the top left corner, they should float on the canvas...

When editing a circuit (arrow icon selected on the toolbar) while in "Design" mode on the left panel, if I right-click on a sub-circuit and then click "view [sub-circuit]", the...