Jim
Jim
Check out issue #87.
I have found that changing the background to a solid color greatly improves VNC performance. Still slightly laggy when on wi-fi, but very usable.
I compiled myself and the indi drivers seem to be working. Thank you.
Hmmmm, it appears that the Indi third party drivers are not installed. Is that correct? If so, is there an option to install them? If I must compile them will...
You are absolutely right. The third party drivers there. I was looking for a driver for the SV905C camera which is actually the indi_svbony_ccd driver. My mistake. Thank you again.
Thank you for the reply. I made no changes to the config.txt file, so I assume the clock frequency was the default, 100kHz. I tried 400kHz (e.g., dtparam=i2c_arm_baudrate=400000), 200 kHz...
I haven't been running the rig with a LLC. I have previously tried using a LLC and had the same disconnect problem. These results are without a LLC. Thank you....
I understand the instructions with regards to a LLC. The system works fine without the LLC. I did run the rig with the LLC and had the same disconnects. So...