Jimbob-B

Just found this project and had a same issue. After various attempts of tinkering with the console settings I ran `sudo dpkg-reconfigure console-setup` and left the font size the same...

Yeah, I had a play with this on my Pi using build number 4.3-2299 from their Git and couldn't get it to work either. Searching for documentation didn't reveal much...

Not sure if this will help you but I just turned off HTTPS enforcement on my Laserjet M254dw and this plugin now seems to work for me. The setting in...

Just leaving my thoughts as I did get it to work with the Maker Pi Pico board but I had to make changes to the source code to get the...

@guidol70 Any chance of an updated source release for this? I can then try again and this time make a proper note of the changes I make for the Maker...

No, I didn't do anything like that. Finally found 5 minutes to have another go and I've managed to get it to work on my Maker Pi Pico board with...

I think this may be the broken `mirror.archlinuxarm.org` issue where it doesn't quite work properly to point you to the nearest mirror. I would manually configure the mirrors by reading...

I'm not sure if I'll be much help as I've not tried running astroarch on my pi5 but couple of things I can think of when reading your question are,...

I've just been testing my SKR Pro and tried to compile after a git pull and the errors I saw were reduced, it fails with this, `/Users/james/Library/Arduino15/packages/STMicroelectronics/tools/xpack-arm-none-eabi-gcc/12.2.1-1.2/bin/arm-none-eabi-g++ -mcpu=cortex-m4 -mfpu=fpv4-sp-d16 -mfloat-abi=hard...

Just updated with a `git clone` and for me it fails to find the `analog` class used in `src\telescope\Telescope.command.cpp`. I fixed this by adding `#include "../lib/analog/Analog.h"` to the top of...