JackAsser1337

Will not claim that I know anything about hardware, but my EasyFlash 1 clones using either modern discreet logic or CPLD-logic (ATF1502) works just fine in 2 Mhz mode. Maybe...

EF always boot in Ultimax so yeah… and ultimax is needed to even program the cart from the c64-side (write cycles wouldn’t reach the flash ROM otherwise). > 11 okt....

Got it to work by using the original crt0.s that comes with cc65. Adding a ONCE segment to the ld2.cfg file will also make it work using the nightly cc65....

It builds now and works in VICE but hangs on real HW. Will need to debug further. To support both older and newer versions of CC65 the ld65 version test...

I’ll open source it once all bugs are fixed. It’s a 2-chip solution that costs $5 including pcb, components and case to produce. > 21 feb. 2020 kl. 20:14 skrev...

Almost done now. Sector assignments are a bit more flexible with this chip so care must be taken when erasing some high-sectors. Also write to odd sectors doesn’t work atm....

Yes, a new EAPI-driver. This is a cost-reduced EF-cart without SRAM. Only specific titles will support it naturally. I'll make sure EasyProg can handle the new chip without $dfxx. It's...

Yep ok, noted. I’ll provide the PRs once everything has been cleaned. /A > 22 feb. 2020 kl. 13:11 skrev Kim Jørgensen : > > Now that I fully understand...