James Harding

Failed to reset GuC, ret = -110 leads to hard LOCKUP on cpu

5

Hello, I am running an Alder Lake i9-12900K with Proxmox (debian). I have been running into this issue for the past few weeks which leads to a complete system crash....

Translate Machine.h for ArduinoCNCShield

1

This issue will automatically convert a Grbl_Esp32 machine definition file to FluidNC YAML format. Change YOUR NAME in the title to some string that identifies your machine configuration. IMPORTANT: Change...

Plex Debrid constantly reporting to 78-154-10-114.ip.btc-net.bg

1

Not sure what is going on here, but whenever plex debrid is running, a lot of traffic is heading off to 78-154-10-114.ip.btc-net.bg 78.154.10.114 https://ipinfo.io/AS8866/78.154.8.0/22 More information about why would be...

Bandwidth Consumption

1

Are other users experiencing incredibly high bandwidth usage when plex_debrid is running?

Sensor Cost Resets when home assistant resets

11

Problem: When HAOS restarts, the sensor "xcel_itron_5_current_summation_delivered_value_cost" resets. Expected Behavior: When HAOS is running without reboots, this value is accumulated. I expect that the value is retained between restarts. Maybe...

Can't open Rugged Box Gridfinity on Windows based system

1

I have tried opening the rugged-box-gridfinity.scad project on a Windows 11 based system and I get this error. I presume it has something to do with the relative directory in...